INTEGRATION¶

Introduction¶

Note

In this section, we introduce how to integrate the node_sdcard driver into the project.

Create a New Component¶

Warning

Before you create a component in the driver directory, make sure you have incorporated the driver directory into the project by adding the path to the driver directory to the EXTRA_COMPONENT_DIRS variable in the project-level CMakeLists.txt file.

Open the project in VSCode, open the integrated terminal, and type in

get_idf

to actiate the ESP-IDF environment. Then type in the following command to create a new component named node_sdcard:

idf.py -C driver create-component node_sdcard

The command above means to create a new component named node_sdcard in the driver directory. After executing the command, you will see a new directory named node_sdcard in the driver directory. And the command will automatically generate the CMakeLists.txt file for the new component, as well as the node_sdcard.h and node_sdcard.c files.

Alternatively, you can mannually create the node_sdcard directory in the driver directory, and then create the CMakeLists.txt, node_sdcard.h, and node_sdcard.c files in the node_sdcard directory.

Replace the Code¶

Component Level

Replace the code in this section into the CMakelists.txt, node_sdcard.h, and node_sdcard.c files under the component.

Project Level

Replace the code in main.c/cpp with the corresponding code. No need to change the CMakeLists.txt file at the project level.

Compile and Flash the Project¶

Open the project in VSCode, open the integrated terminal, and type in

idf.py build flash monitor

Then you will see the feedback from the serial monitor. Alternatively, you can check the SD card to verify.